Current Category
Locomotives

	Series 1 T class painted body only Painted and decaled series 1 T class body shell only. Requires Atlas VO-1000 mechanism to complete.		Price:	QTY:

	Series 1 T class fully ready to run Ready to run Series 1 T class on Atlas VO-1000 mechanism.		Price:	QTY:

	G Loco Shell painted G Loco Professionally painted. Needs Atlas SD7/24/26 mech and Microtrains 1015 couplers.		Price:	QTY:

	G Loco Shell RTR with Atlas Mech G Loco Professionally painted fitted with an Atlas mech and Microtrains couplers.		Price:	QTY:

	Victorian Series2 T class Cast from an etched brass master this is our most detailed kit yet! It goes on a LifeLike SW9 chassis (available seperately).		Price:	QTY:

	BL loco shell painted BL Loco Professionally painted. Needs Atlas SD7/24/26 mech and Microtrains 1015 couplers		Price:	QTY:

	BL loco shell painted on Atlas mech BL Loco Professionally painted fitted with an Atlas mech and Microtrains couplers.		Price:	QTY:

	AN 600 Class The 600 class locomotives are based on the NSW 45 class. They were bought for the standard guage link from the NSW border to Adelaide. This kit needs an ATLAS RSD4/5 mech.		Price:	QTY:

	442 Brass etch (unassembled, unpainted) Brass etch for an NSW 442 Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas SD7/SD24/SD26 mechanism or a Lifelike SD7 mechanism. Assembled model shown.		Price:	QTY:

	80 Brass Etch (unassembled, unpainted) Brass etch for an NSW 80 Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas SD7/SD24/SD26 mechanism or a Lifelike SD7 mechanism.		Price:	QTY:

	700 Brass Etch (unassembled, unpainted) Brass etch for an 700 Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas SD7/SD24/SD26 mechanism or a Lifelike SD7 mechanism. Assembled and partly painted model by Robert Carpenter.		Price:	QTY:

	NR Brass Etch (unassembled, unpainted) Brass etch for an NR Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. has instructions. Requires an Atlas SD50/60 mechanism. Assembled and painted model by Robert Carpenter.		Price:	QTY:

	AN Brass Etch (unassembled, unpainted) Brass etch for an AN Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas SD50/60 mechanism. Assembled model shown.		Price:	QTY:

	DL Brass Etch (unassembled, unpainted) Brass etch for an EL Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. Has instructions. Requires an Atlas SD7/SD24/SD26/SD35 mechanism with minor modifications. Assembled and painted model by John Miller.		Price:	QTY:

	EL Class Brass Etch (unassembled, unpainted) Brass etch for an EL Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas SD7/SD24/SD26 mechanism with minor modifications. Assembled and painted model by John Miller.		Price:	QTY:

	1st Series T class Loco (unassembled, unpainted) Brass etch for first series ("Flat Top") T Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. No instructions. Requires an Atlas VO-1000 mechanism.		Price:	QTY:

	C Class Brass Etch (unassembled, unpainted) Brass etched kit of the VR/VLINE C class locomotive. No instructions.		Price:	QTY:

	N Class Brass Etch (unassembled, unpainted) Brass etch for Victorian N Class locomotive. Requires soldering skills to assemble. These are fairly simple kits to assemble, but very nicely detailed. Has instructions. Requires an Atlas SD9/24/26/35mechanism.		Price:	QTY:

	VLINE P class (unassembled, unpainted Brass etch for Victorian P Class locomotive. Requires soldering skills to assemble. No instructions. Requires an Atlas SD7/24/26 mechanism. Assembled and painted model by Rob Carpenter.		Price:	QTY:

	NSW 442 Loco kit Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	NSW 421 Loco Kit Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	NSW 41 Class Brass loco kit Brass and urethane kit for ATLAS VO 1000.		Price:	QTY:

	NSW 42 Loco Kit Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	NSW 49 Class Brass loco kit Brass and urethane kit for ATLAS VO 1000.		Price:	QTY:

	NSW Endevour Railcar Set (2 cars)		Price:	QTY:

	NSW 48 Class Brass loco kit		Price:	QTY:

	VR B class Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	VR S Class Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	SAR/ANR/AN 830 class brass loco kit Etched brass kit with lost wax casting, instructions and SAR decals. Requires Atlas VO-1000 mechanism (available seperately).		Price:	QTY:

	GM1 Loco Modified ex WEICO polyurethane kit improved with brass etches for LifeLike SD7. Can also use ATLAS SD7/24/26. Requires decals.		Price:	QTY:

	Atlas RSD 4/5 This is a complete ATLAS RSD 4/5, several roads available. It is best used for the 600 class locomotive, in which it requires minor modifications.		Price:	QTY:

	Atlas VO 1000 mech only Atlas VO-1000 mechanism. Used in the 48, 49, 830 etched kits.		Price:	QTY:

	Atlas SD7 mechamism Atlas SD7 mechanism. useful in a number of kits above. High quality mech, worth every sent.		Price:	QTY: